6000KVA/800KV Variable Frequency Series Resonance Test Set GIS tan solution a awm em?

 Jun 24, 2024

 Message pakhat dah la .

 

I. Test object leh test ngai .
GIS tan AC withstand voltage test, test frequency 30-300Hz, capacitance 0.03UF aia tlem emaw, a tlukpui emaw, test voltage 800kV aia tlem emaw, a tlukpui emaw, test hun 1min a awm.
II a ni. Hnathawhna hmun .
1. boruak lum leh vawt: -100C-500C;
2. Relative humidity: 90% RH aia tlem emaw, a tlukpui emaw;
3. Altitude: meter 1000 aia tlem emaw, a tlukpui emaw;
iii a ni. Main Technical Parameters leh Device hnathawh dan .
1. Nameplate siam chhuah theihna: 6000KVA;
2. Input power supply: pathum{{1}phase 380V voltage, frequency 50Hz nei;
3. Rated voltage: 800kV;
4. rated current: 7.5a;
5. Hnathawh tam dan: 30-300Hz;
4. Device output waveform: sine wave;
5. Waveform distortion rate: Output voltage waveform distortion rate 1% aia tlem emaw, a tlukpui emaw;
6. Hnathawh hun: Rated load hnuaiah minute 60 chhunzawm zel phalsak; Minute 1 chhung overvoltage vawi 1.1;
7. Temperature Rise: Rated load hnuaia minute 60 chhung hnathawh chhunzawm zel hnuah, temperature sang chu 65K aia tlem emaw, a tlukpui emaw a ni;
8. Quality Factor: Device ngei pawh q 30 aia tam emaw, a tlukpui emaw (f=45Hz);
9. Protection function: thil test tawh tan overcurrent, overvoltage, leh sample flashover protection a nei a (a chipchiar zawkna chu Variable Frequency Power Supply Section en la)
10. A tehna dik: System RMS 1.5 level;
iv. Thil hmanrua chuan standards a zawm .
GB10229-88 chhunga thil thlengte chu a ni.
GB1094 power hmanga siam theih a ni.
GB50150-2016 Electrical hmanrua dahna Engineering Electrical hmanrua Handover Test Standard
DL/T 596-1996 Electric power hmanrua atana invenna atana hman tur dan siam
GB1094.1-GB1094.6-96 Enclosures hmanga venhimna℃pek
GB2900 Electrotechnical hmanga thumal hman dan tur .
GB/T16927.1~2-1997 High voltage test dan tur a ni.
V. Device capacity tehna Reactor pali siam a nih chuan reactor pakhat chu 100 a ni ang.
1500KVA/200KV/7.5A/53H, leh a hman theih zawng zawng chu 6000KVA a ni ang.
1. AC withstand Voltage Test for GIS, test frequency 30-300Hz, capacitance 0.03UF aia tlem emaw a aia tlem emaw, test voltage 800kV aia tlem emaw, a aia tam emaw, test hun 1min a awm. Reactor pali hmangin series-ah (coefficient 1.6), l{{7}*4*{ 9}h hmangin, chutah chuan .
A rilru a buai em em a, a rilru a hah em em bawk a, a rilru a buai em em bawk a, a rilru a hah em em bawk a.(2×3.14×√339×0.03×10-6){{8}hz
Test current: I{{0}πFCU test{{1}Π×50×0.03×10-6×800×103=7.5A
Device capacity hi 6000kVA/800KV a ni a; Reactor hi section paliah then a ni a, reactor section pakhat chu 1500KVA/200KV/7.5A/53H a ni. Combined use hmangin a chunga kan sawi tawh tested object test requirements a tlin thei a ni.
Test voltage 800kvgis aia tlem emaw a aia tlem emaw .Series-a reactor hman dan .Section 4 a awm tawh bawk.Excitation transformer output terminal 40kV thlan a ni.
VI. System configuration leh a parameters te .
1. A rilru a buai em em a, a rilru a hah em em bawk a.
a) Nameplate theihna: 315KVA;
b) Input voltage: 0{1}}400V, single-phase;
c) A chhuahna tur voltage: 10/20/40kV
d) structure: oil chi hrang hrang;
2. A hlawhtlinna chu a hlawhtlinna a ni a, a hlawhtlinna chu a hlawhtlinna a ni.
a) Rated output theihna: 315KW
b) Hnathawktute chakna pek chhuah dan: 380±10%V (pathum{2}}phase), power frequency
c) A chhuahna tur voltage: 0{1}}400V, single-phase .
d) Rated input current: 787.5a a ni.
e) Rated output current: 787.5a
f) Voltage resolution: 0.01kV a ni.
g) Voltage tehna dik: 1.5% .
h) Frequency siamrem theihna hmun: 30-300Hz
i) Frequency siamrem dan tur: 0.1Hz aia tlem emaw, a tlukpui emaw
j) A awm tam dan: 0.1% .
K) Hman hun chhung: Nameplate capacity hnuaiah 60min chhunzawm zel tur a ni.
l) Nameplate capacity hnuaia 60min chhunga continuous operation hnuaia components temperature sang ber chu 65K aia tlem emaw, a tlukpui emaw a ni;
m) Noise level: 50dB aia tlem emaw, a tlukpui emaw
3. A rilru a buai em em a, a rilru a hah em em bawk a. DK-1500KVA/200KV 4 pcs
a) Nameplate siam theihna: 1500KVA;
b) Rated voltage: 200kV;
c) Rated current: 7.5a;
d) Inductance: 53h/single section;
e) Quality factor: Q 30 aia tam emaw, a tlukpui emaw (f{1}}Hz);
f) structure: oil chi hrang hrang;
4. Capacitive Voltage Divider FRC-800KV/1000PF 1 Set
a) Rated voltage: 800kV;
b) Voltage sang tak nei thei: 1000pf
c) Dielectric hloh: TG σ 0.5% aia tlem emaw, a tlukpui emaw;
D) Partial pressure ratio: 9000:1.
e) Measurement dik tak: value level tha tak 1.5;
Inquiry thawn rawh .
Inquiry thawn rawh .